Categories
Drilling Fixtures Replacement Parts Sideplates

How Find Our Gunbroker Listings! Search Gunbroker Using The Following Search Terms!

MAC-10, M-11/9 Sear Studs, Powder Springs, RPB, SWD, NOS

M-11/9 Machine Gun Replacement Sideplates RPB, Cobray, SWD, Powder Springs

MAC-10, M-10 Machine Gun Replacement Sideplates RPB, Cobray, SWD

M11/9 Full Auto Drilling Fixture Drilling Jig

MAC-10 .45 Cal Extractor! Powder Springs, SWD, RPB, Cobray

M11/9 And M-12, Subguns Rear Sling Straps! RBP, SWD Powder Springs

MAC-10 M-10 Full Auto Drilling Jig Drilling Fixture

MAC-10 Flat New Old Stock RPB, SWD, Powder Springs, Cobray

Categories
Replacement Parts

MAC-10 .45/9MM Extractors

“Get your hands on the rarest MAC-10 extractors on the market. Our stock includes extractors for the .45 Cal and 9MM MAC-10, SWD, RPB versions, and early Cobray MACS built from spare parts. These extractors are made of unobtainium and are nearly extinct due to the absence of production for the last 30 years. They have been in storage since 1990-1991 and may show minor cosmetic imperfections, but are new, have never been installed and are original Powder Springs production. As with all extractors of this type, minor fitting and adjustments may be necessary.

Please note that these extractors will only fit OPEN BOLT firearms and will not work with any version of the MAC-10 using a machined bolt or ANY CLOSED BOLT type. Various companies have promised that these would be back in stock, but they seem never to materialize so don’t miss out on this opportunity. Get your hands on the last remaining stock of these hard-to-find cast bolt MAC-10 .45/9MM cal extractors while you still can.”

Categories
Replacement Parts

MAC-10, M-10 Style Receiver Flat Frame Flat

MAC-10, M-10 Style Receiver Flat Frame Flat

Found in the basement and just come out of long term storage!

This listing is for MAC-10 or M-10 style receiver or frame flats, which can be used to legally construct firearms. These flats were produced using original machinist drawings by a now-defunct manufacturer, and are accurate to within .005 inches. The flats may have some surface discoloration from the manufacturing process, but there is no pitting. These high-quality 12-gauge mild steel flats are perfect for your firearm project and are ready to use. These flats are ideal for gun enthusiasts, home builders, and anyone looking to construct a legal firearm.

Categories
Drilling Fixtures

M11/9 Machinegun Drilling Fixture RPB SWD Cobray Full Auto Drilling Fixture

M11/9 Machinegun Drilling Fixture RPB SWD Cobray Full Auto Drilling Fixture

In this listing is a precision made full auto drilling fixture. These are used to accurately locate the trigger pin and selector holes in the M-11/9 semiauto frames such as those built by SWD, RPB, Powder Springs, the old Midland, Texas company and others.

These are the ONLY drilling fixtures being manufactured today which will work on BOTH open and closed bolt semiauto versions of the M-11/9; as both the selector and trigger pin holes are incorporated into the fixture!

(Some closed bolt semiauto guns may require welding shut and re-drilling the trigger pin hole due to interference, depending on location.)

Made of 1/4″steel, flame and quench hardened, the guide holes in these fixtures are precision drilled in a special jig to ensure accuracy of location.

Not available for many years, we have put these fixtures into limited production so don’t waste any time, current supplies are limited!

With attaching bolt, washer, nut and instruction sheet.

Some local, state and federal regulations may apply to the use of this tool and these tools are intended for use ONLY by persons as may be authorized under the law!

Categories
Replacement Parts

MAC-10, M-11/9 Sear Studs, Powder Springs, RPB, SWD, NOS

MAC-10, M-11/9 Sear Studs, Powder Springs, RPB, SWD, NOS

NOS (New Old Stock) out of the RPB auction by way of SWD around 30 years ago, these are always sought after and invaribly the missing piece!

Found in the basement!

Categories
Replacement Parts

M11/9, M-12, M11/9 Subgun Rear Sling Straps

We found a few of these which came out of the RBP and Texas Mac auctions by way of SWD.

Stored for over 30 years they could probably use a good washing but are otherwise AS NEW!

Categories
Drilling Fixtures

MAC-10 M10 Full Auto Drilling Fixture

MAC-10 M-10 Full Auto Drilling Fixture

In this listing is a precision made full auto drilling fixture. These are used to accurately locate the trigger pin and selector holes in the MAC-10 or M-10 style frames such as those built by SWD, RPB, Powder Springs, the old Midland, Texas company and others.

Made of 1/4″steel, flame and quench hardened, the guide holes in these fixtures are precision drilled in a special jig to ensure accuracy of location.

Not available for many years, we have put these fixtures into limited production so don’t waste any time, current supplies are limited!

With attaching bolt, washer, nut and instruction sheet.

These are the ONLY drilling fixtures being manufactured today which will work on BOTH open and closed bolt semiauto versions of the MAC-10; as both the selector and trigger pin holes are incorporated into the fixture!

(Some closed bolt semiauto guns may require welding shut and re-drilling the trigger pin hole due to interference, depending on location.)
Some local, state and federal regulations may apply to the use of this tool.

Categories
Sideplates

M10 Sideplates

Over the years several manufacturers and thousands of individuals built MAC-10 style transferable subguns with three-piece frames and now after many years of use the sideplates are battered and worn with elongated holes and some even warped.

These sideplates were designed to remedy any such issues found on older guns.

Manufactured from 12 gauge mild steel and to.005″ tolerance with all holes accurately placed and precision jig drilled to the correct size, we at Inetoutcomes believe we can say a that these are the best aftermarket sideplates ever manufacutured.

Designed to fit the ubiquitous and popular three-tab center section, photo of which is shown for reference. They can also be made to easily fit the two types of non-tab center sections out there.

These sideplates are intended only for lawful use by such persons as may be authorized by law.

We do not provide instructions for their use, answer questions regarding their use, possess or sell center sections.

Categories
Sideplates

M-11/9 Machine Gun Replacement Sideplates

M-11/9 Machine Gun Replacement Sideplates RPB, Cobray, SWD, Powder Springs

Over the years several manufacturers and thousands of individuals built M-11/9 style transferable subguns with three-piece frames and now after many years of use the sideplates are battered and worn with elongated holes and some even warped.

These sideplates were designed to remedy any such issues found on older guns.

Manufactured from 14 gauge mild steel and to.005″ tolerance with all holes accurately placed and precision jig drilled to the correct size, we at Inetoutcomes believe we can say a that these are the best aftermarket sideplates ever manufacutured.

Designed to fit the ubiquitous and popular two-tab center section, photo of which is shown for reference. They can also be easily made to fit the two types of non-tab center sections which are out there.

These sideplates are intended only for lawful use by such persons as may be authorized by law.

These sideplates are also perfectly legal to possess or store for future use should the law change.

We do not provide instructions for their use, answer questions regarding their use, possess or sell center sections.