Categories
Replacement Parts

M-11/9 Machine Gun Replacement Sideplates

M-11/9 Machine Gun Replacement Sideplates RPB, Cobray, SWD, Powder Springs

Over the years several manufacturers and thousands of individuals built M-11/9 style transferable sub guns with three-piece frames and now after years of use the side plates are battered and worn with elongated holes and some even warped.

These side plates are designed to remedy any such issues found on older guns.

Made from 14 gauge mild steel and to.005″ tolerance with all holes accurately placed and precision jig drilled to the correct size, we at Inetoutcomes believe we can say that these are the best aftermarket side plates ever manufactured.

Intended to fit the ubiquitous and popular two-tab center section, a photo of which is shown for reference. They can also be easily made to fit the two types of non-tab center sections which are out there.

These side plates are only for lawful use by such persons as may be authorized by law.

These side plates are also perfectly legal to possess or store for future use should the law change.

We do not provide instructions for their use, or answer questions regarding their use, or possess or sell center sections.

“They can also be easier to fit the two types of non-tab center sections which are out there.”

Categories
Mac 10 Parts Replacement Parts

M10 Sideplates

Over the years many manufacturers and thousands of individuals built MAC-10 style transferable sub-guns with three-piece frames and after many years of use, the side plates are battered and worn with elongated holes and some even warped.

These side plates were designed to fix any such issues found on older guns.

Made from 12 gauge mild steel and to .005″ tolerance with all holes accurately placed and precision jig drilled to the correct size, we at Inetoutcomes believe we can say that these are the best aftermarket side plates ever manufactured.

Designed to fit the ubiquitous and popular three-tab center section, a photo of which is shown for reference. They can also be easily made to fit the two types of non-tab center sections which are out there.

Intended only for lawful use by such persons as may be authorized by law.

We do not provide instructions for their use, or answer questions regarding their use, possess, or sell center sections.

” They can also be easily to fit the two types of non-tab center sections which are out there.” on the original website should read: ” They can also be easily made to fit the two types of non-tab center sections which are out there.”

M-10 Sideplates
Mac 10 Sideplates
Categories
Replacement Parts

M11/9, M-12, M11/9 Subgun Rear Sling Straps

Found a limited number of these which went through the RBP, Texas Mac and SWD auctions.

Stored for over 30 years they need a good cleaning but are otherwise AS NEW!

KODAK Digital Still Camera
Categories
Mac 10 Parts Replacement Parts Stock

MAC-10, M-11/9 Sear Studs, Powder Springs, RPB, SWD, NOS

MAC-10, M-11/9 Sear Studs, Powder Springs, RPB, SWD, NOS

New Old Stock out of the RPB auction through of SWD around 30 years ago, these are sought after and invaribly the missing piece!

Found in the basement under some crates!

Categories
Replacement Parts

M11/9 Machinegun Drilling Fixture RPB SWD Cobray Full Auto Drilling Fixture

M11/9 Machinegun Drilling Fixture RPB SWD Cobray Full Auto Drilling Fixture

In this listing is a precision-made full auto drilling fixture. These are used to accurately locate the trigger pin and selector holes in the M-11/9 semiauto frames such as those built by SWD, RPB, Powder Springs, the old Midland, Texas company, and others.

The ONLY drilling fixtures made today will work on BOTH open and closed bolt semi auto versions of the M-11/9; as both the selector and trigger pin holes are incorporated into the fixture!

(Some closed bolt semi-auto guns may require welding closed and re-drilling the trigger pinhole due to interference, depending on location.)

Made of 1/4″steel, flame, and quench hardened, guide holes in these fixtures are precision drilled in a special jig to ensure accuracy of the location.

Not available for many years, we have put these fixtures into limited production so don’t waste any time, current supplies are limited!

With attaching bolt, washer, nut, and instruction sheet.

Some local, state, and federal regulations may apply to using this tool and these tools are intended for use ONLY by persons as may be authorized under the law!

Categories
Replacement Parts

MAC-10, M-10 Style Receiver Flat Frame Flat

MAC-10, M-10 Style Receiver Flat Frame Flat

Found in the basement and just come out of long-term storage!

In this listing are MAC-10 or M-10 style receivers or frame flats from which legally permitted firearms may be constructed. These flats were produced from original machinist drawings by a now-defunct maker and are accurate to within .005″! There may be a small amount of surface discoloration from the manufacturing process but no pitting and that of course will not be a problem for the home builder as the flat will be welded, ground on, and finished in a way that will probably require that it be dipped in some kind of aggressive cleaner anyway. Made of high-quality 12 gauge mild steel, these flats are just the thing for your firearm project and are ready to go!

Receiver Flat Frame Flat