Tag: RPB

Categories
Replacement Parts

M11/9 Machinegun Drilling Fixture RPB SWD Cobray Full Auto Drilling Fixture

M11/9 Machinegun Drilling Fixture RPB SWD Cobray Full Auto Drilling Fixture

In this listing is a precision-made full auto drilling fixture. These are used to accurately locate the trigger pin and selector holes in the M-11/9 semiauto frames such as those built by SWD, RPB, Powder Springs, the old Midland, Texas company, and others.

The ONLY drilling fixtures made today will work on BOTH open and closed bolt semi auto versions of the M-11/9; as both the selector and trigger pin holes are incorporated into the fixture!

(Some closed bolt semi-auto guns may require welding closed and re-drilling the trigger pinhole due to interference, depending on location.)

Made of 1/4″steel, flame, and quench hardened, guide holes in these fixtures are precision drilled in a special jig to ensure accuracy of the location.

Not available for many years, we have put these fixtures into limited production so don’t waste any time, current supplies are limited!

With attaching bolt, washer, nut, and instruction sheet.

Some local, state, and federal regulations may apply to using this tool and these tools are intended for use ONLY by persons as may be authorized under the law!

Categories
Replacement Parts

MAC-10, M-10 Style Receiver Flat Frame Flat

MAC-10, M-10 Style Receiver Flat Frame Flat

Found in the basement and just come out of long-term storage!

In this listing are MAC-10 or M-10 style receivers or frame flats from which legally permitted firearms may be constructed. These flats were produced from original machinist drawings by a now-defunct maker and are accurate to within .005″! There may be a small amount of surface discoloration from the manufacturing process but no pitting and that of course will not be a problem for the home builder as the flat will be welded, ground on, and finished in a way that will probably require that it be dipped in some kind of aggressive cleaner anyway. Made of high-quality 12 gauge mild steel, these flats are just the thing for your firearm project and are ready to go!

Receiver Flat Frame Flat
Categories
Mac 10 Parts

MAC-10 .45/9MM Extractors

The rule of scarcity says that the scarcer any given thing is, the more expensive it becomes and this is true of these extractors. As near as we can tell this is the ONLY remaining stock in the world of these hard-to-find cast bolt MAC-10 .45/9MM cal. extractors. Get’em now while you still can. There are no more! Up for grabs in this listing are extractors for the .45 Cal. and 9MM MAC-10, the SWD and RPB versions, both semi and full-auto OPEN BOLT firearms, as well as a few of the early Cobray MACS built from spare parts which use the CAST bolt and the round shank extractor. These extractors are made of unobtainium and are nearly extinct because there has been no production in about 30 years. These have been in storage since 1990-1991 and may show finish imperfections but are new, have never been installed, and are original Powder Springs production. As with ALL extractors of this type, minor fitting and adjustments may be necessary. These extractors will NOT fit any version of the MAC-10 using a machined bolt or ANY CLOSED BOLT type! Various companies have promised that these would be back in stock but they seem never to materialize so get’em while the getting’s good!

Categories
Mac 10 Parts Stock

Inetoutcomes

How Find Our Gunbroker Listings! Search Gunbroker Using The Following Search Terms!

MAC-10, M-11/9 Sear Studs, Powder Springs, RPB, SWD, NOS

M-11/9 Machine Gun Replacement Sideplates RPB, Cobray, SWD, Powder Springs

MAC-10, M-10 Machine Gun Replacement Sideplates RPB, Cobray, SWD

M11/9 Full Auto Drilling Fixture Drilling Jig

MAC-10 .45 Cal Extractor! Powder Springs, SWD, RPB, Cobray

M11/9 And M-12, Subguns Rear Sling Straps! RBP, SWD Powder Springs

MAC-10 M-10 Full Auto Drilling Jig Drilling Fixture

MAC-10 Flat New Old Stock RPB, SWD, Powder Springs, Cobray

The Mac-10 is a blowback-operated submachine gun that fires from an open bolt. It is chambered in 9mm Parabellum or .45 ACP and features a telescoping bolt that reduces the overall length of the weapon. The Mac-10 was designed to be a lightweight and portable weapon that could be easily concealed or carried in a small bag or briefcase.

The Mac-10 gained notoriety in the 1970s and 1980s, when it became a popular weapon among gang members and criminals in the United States. Its high rate of fire and ease of use made it a popular choice for drive-by shootings and other violent crimes. The Mac-10 was also used by special forces units and law enforcement agencies, including the U.S. Secret Service and FBI.

Despite its popularity, the Mac-10 has some notable drawbacks. Its high rate of fire and short barrel length make it difficult to control, and it can be inaccurate at longer ranges. It also has a reputation for being unreliable and prone to jamming. These issues have led many military and law enforcement agencies to replace the Mac-10 with more modern and reliable weapons.

Today, the Mac-10 is considered a classic weapon of the Cold War era and has become popular among collectors and enthusiasts. It has also been featured in numerous movies, TV shows, and video games, where it is often depicted as a weapon of choice for tough, streetwise characters.